Foamkore Other


Oversized Foamkore Panels

Foamkore is available with sizes up to 5X12. These larger sizes will provide more design flexibility at a much reduced weight from standard materials.

Oversized Panels are available with an optional internal frame of MDF or solid lumber. Solid edges allow for conventional attachment methods to be used.

Face materials standard for Oversized Panels are 1/8" MDF up to 5X12 and .080 Hardboard up to 4X12. Other face materials may be available on request.

 

Internal Perimeter Band More Info 

Foamkore is available with an optional Internal Perimeter Band. The solid edges allow for conventional attachment methods to be used.

Internal Bands produce a lightweight panel product with a solid look. Internal bands offered include: MDF, Particleboard, solid wood, and plywood. These bands can be produced to customer specifications.

Face materials can include numerous substrates such as: Hardboard, MDF, and Plywood. Optional face materials include veneer, HPL, Melamine, and other materials.

Laminated

Kerfkore Company can provide panels with either high pressure laminates or veneers applied.

Foamkore laminated with these materials provide superior durability and can be matched to many existing products.

Many variable prints are available for application. There are quantity requirements so please contact factory with your specific information for availability.

PRODUCT CATALOG


Download our Catalog

OVERVIEW VIDEO
NEWS & EVENTSArchive
TESTIMONIALMore
“We saved about four days worth of labor on a recent project by using TimberFlex (Over a 70% reduction). Not only did we produce a cleaner product, but we were able to move on to the next project ahead of schedule.

We used to kerf our own boards, something that takes time and requires very little skill. Interior Products allowed us to remove this step and focus our skills where they are really needed.

The Interior Product's line is great because it turns a tight radius and is quick and easy to use.

Less material, less thinking time, less labor = less overall cost.

Before, we would take small slats (wide ripped out of a 1 x), faces touching, backs out, build a form around it, then fill the gaps with Bondo, sand and smooth out. Now, we simply cut ribs to specified shape and apply the TimberFlex. It doesn't get much easier.

Labor is always one of our biggest concerns. We don't mind paying a little more up front, if the result is an overall reduction of labor in the end. The use of TimberFlex eliminates the trial and error that we previously experienced with old methods.”
Michael Phillips, Mid-American Precast Inc.